7
C. TO PROGRAM GROUP DIAL
1. Open all three panel covers
2. Press Data Registration
3. Press ▼ until display shows “4. ADD. REGISTRATION”
4. Press OK
5. Press ▼ to display “3. GROUP DIAL”
6. Press OK
7. Press ▼
(if necessary) until an empty space appears
8. Press OK twice
9. Close all three panel covers & press desired one-touch keys
& / or the coded speed dial numbers
10. Press OK twice
11. Enter name for the above group dialer (refer to A.9. on III : TO
STORE FAX NUMBERS)
12. Press OK
13. To continue, press Data Registration
14. Repeat steps No. 7 to No. 12
15. To end, press Stop
To Next Page
Loading...
