Canon L360 - Coded Speed Dial (*00 to *99)

6
B. CODED SPEED DIAL (*00 TO *99 )
1. Open One-Touch Speed Dial panel
2. Press Data Registration
3. Press
∨
∨∨
∨
to display “2. TEL REGISTRATION”
4. Press Set
5. Press
∨
∨∨
∨
to display “2. CODED SPD DIAL”
6. Press Set
7. Press
∨
∨∨
∨
(if necessary) until an empty space appears
8. Press Set twice
9. Enter fax number
10. Press Set twice
11. Enter name (refer to A.9. on III : TO STORE FAX NUMBERS)
12. Press Set
13. To continue, press Data Registration
14. Repeat steps No. 7 to No. 12
15. To end, press Stop


