Canon L360 - To Program Group Dial

7
C. TO PROGRAM GROUP DIAL
1. Open One-Touch Speed Dial panel
2. Press Data Registration
3. Press
∨
∨∨
∨
to display “2. TEL REGISTRATION”
4. Press Set
5. Press
∨
∨∨
∨
to display “3. GROUP DIAL”
6. Press Set
7. Press
∨
∨∨
∨
(if necessary) until an empty space appears
8. Press Set twice
9. Close panel cover & press desired one-touch keys
& / or the coded speed dial numbers
10. Press Set twice
11. Enter name for the above group dialer (refer to A.9. on III : TO
STORE FAX NUMBERS)
12. Press Set
13. To continue, press Data Registration
14. Repeat steps No. 7 to No. 12
15. To end, press Stop


