What to do if my Canon LASERBASE MF3110 says 'REC. PAPER JAM'?
If your Canon All in One Printer displays 'REC. PAPER JAM', it means there is a paper jam. To resolve this, clear the paper jam, reload paper in the cassette or multi-purpose feeder, and then reset the machine by opening and closing the front cover.
Why does paper not feed correctly in my Canon All in One Printer?
If paper does not feed correctly in your Canon All in One Printer: * Ensure the paper stack in the cassette or the paper in the multi-purpose feeder does not exceed the capacity of the cassette or multi-purpose feeder. * Make sure the paper stack is loaded properly, and that the paper guides are adjusted correctly. * Push the cassette into the machine as far as it will go, ensuring it is not tilted or inserted at an angle.
How to fix 'CHECK PAPER SIZE' on Canon LASERBASE MF3110?
The 'CHECK PAPER SIZE' error on your Canon All in One Printer means that the paper size in the cassette or multi-purpose feeder doesn't match the size specified in the Menu's . Load the correct paper size or change the in the of the Menu. Then, reset the printer by opening and closing the front cover.
Why is the Alarm indicator on my Canon LASERBASE MF3110 on?
If the Alarm indicator comes on your Canon All in One Printer, it may be due to a paper jam or no paper in the cassette or multi-purpose feeder. Clear any paper jam, or load paper. If there is no paper jam or paper is loaded, unplug the machine and wait approximately 3 to 5 minutes, then plug it in again.
Why will my Canon LASERBASE MF3110 All in One Printer not make a copy?
If your Canon All in One Printer will not make a copy, several factors could be responsible: * Ensure the cartridge is installed correctly. * Remove the sealing tape from the cartridge. * Insert the cassette completely into the machine. * If the power cord has just been connected, wait a while before attempting to scan. * If the energy saver mode is on, press the [Energy Saver] button to restore the machine.
What does 'CHECK PRINTER' mean on my Canon LASERBASE MF3110 All in One Printer?
If your Canon All in One Printer displays 'CHECK PRINTER', it indicates a problem has occurred. Reset the machine by opening and then closing the front cover. If the message persists, unplug the machine from the power supply and then plug it back in.
Why does my Canon LASERBASE MF3110 say 'SUPPLY REC. PAPER'?
If your Canon All in One Printer shows 'SUPPLY REC. PAPER', it means there is no paper loaded in the cassette or multi-purpose feeder. Load paper into the cassette or multi-purpose feeder. Make sure the paper stack in the cassette does not exceed the capacity of the cassette. If using the multi-purpose feeder, load paper one by one.
Why does my Canon LASERBASE MF3110 keep jamming?
If your Canon All in One Printer experiences repeated paper jams, consider the following: * Check the size, thickness, and type of paper you are using. * Ensure the paper stack in the cassette is loaded correctly by fanning it before loading. * Ensure the output tray is free of obstructions. * Verify the machine is installed in a proper location.
Why won't my Canon LASERBASE MF3110 All in One Printer scan a document?
If your Canon All in One Printer will not scan a document: * Wait for a while if the power cord has just been connected. * Check that the USB cable is connected securely to the machine and your computer.
What to do if my Canon All in One Printer says 'INSTALL CARTRIDGE'?
If your Canon All in One Printer displays 'INSTALL CARTRIDGE', it means the cartridge is either not installed or not installed correctly. Install the cartridge correctly.
General| Print Technology | Laser |
|---|---|
| Paper Capacity | 250 sheets |
| Output Tray Capacity | 100 sheets |
| Print Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Connectivity | USB |
| Functions | Print, Copy, Scan |
| Media Types | Plain paper, envelopes, labels, transparencies, cardstock |
| Media Sizes | A4, A5, B5, Executive, envelopes |
| Operating System Compatibility | Windows |
To Next Page
