74 Advanced Shooting
Advanced Image Stabilization
The image stabilizer reduces camcorder blur (blur due to the cam-
corder moving) so you can get nice, stable shots. Select the image sta-
bilization mode according to the shooting conditions.
Operating modes:
Options
(
Default value)
NOTES
• If the degree of camcorder shake is too high, the image stabilizer may
not be able to fully compensate.
SCN
> [ Other Settings] > p > [Image Stabilizer]
> Desired IS mode > [X]
[Dynamic]
Compensates for a higher degree of camcorder
shake, such as when shooting while walking, and is more effec-
tive as the zoom approaches full wide angle.
[ Standard] Compensates for a lower degree of camcorder
shake, such as when shooting while remaining stationary, and is
suitable for shooting natural-looking scenes.
[j Off] Use this setting when the camcorder is mounted on a
tripod.
Powered IS
You can use Powered IS to make the image stabilization even more
powerful. Holding the LCD panel with your left hand will add to the
stability of the shot.
• Repeat, selecting [OFF], to turn off Powered IS.
> [È Powered IS] > [ON] > [X]
To Next Page
Loading...
Need help?
General