Entering Characters
8WFY-02L
Enter alphanumeric char
acters using the numeric keys on the control panel.
Entering Characters Using the Control Panel (Touch Panel Model)(P. 127)
Entering Characters Using the Control Panel (5 Lines LCD Model)(P. 128)
Entering Characters Using the Control Panel (Touch Panel Model)
You can enter letters, numbers, and symbols using the control panel.
The type of characters that you can enter may be limited depending on the item.
If the value input range is limited, the value that you can enter is displayed in parentheses ( ) next to the input î ´eld.
Changing the Character Type
Pr
ess [A/a/12] to switch the type of character that is entered. The currently selected type of character is
indicated by the "A", "a", or "12" displayed above and to the right of the text input î ´eld.
You can also press
to switch the type of character.
Y
ou cannot change the character type for items whose character type is limited.
Entering Characters and Spaces
You can enter characters and symbols by using the numeric keys and by pressing keys displayed on the
control panel. The keys to enter characters and the characters you can enter are the following.
When you place a cursor after a character and press
, a space is entered.
When the entry mode is set to [a] or [A], a symbol can be enter
ed by pressing
or pressing [#].
Key A a 12
@ . - _ / 1
ABC abc 2
DEF def 3
GHI ghi 4
Basic Operations
127
To Next Page
Loading...
Need help?
General
