What to do if my Canon MG3160 says 'Ink cartridge not installed'?
If your Canon Printer displays an 'Ink cartridge not installed' message, first, re-set the ink cartridge properly. Then, check the carriage contact pins for any foreign material, damage, or bending. If the issue persists, replace the ink cartridge.
How to fix Canon MG3160 Printer when it says 'No paper in the front tray'?
If your Canon Printer indicates that there is no paper in the front tray, set the paper in the front tray and then press the OK button. Also, check for any foreign material in the paper path, including the front tray and inside the rear cover. Ensure that the paper guides are set properly.
What to do if my Canon Printer says non-genuine ink cartridge are installed?
If your Canon Printer displays a 'Premium Contents print error' message, the cause is non-genuine ink cartridge are installed. To resolve this, install the supported (Canon-genuine) ink cartridges.
What to do if my Canon MG3160 has packing material not removed?
If your Canon Printer indicates that packing material has not been removed, open the paper output cover, remove the tapes and packing material from the carriage, and then close the paper output cover.
What to do if my Canon MG3160 has a carriage error?
If your Canon Printer displays a carriage error, it means there's foreign material obstructing the carriage movement. Remove any foreign material to resolve the issue.
What to do if my Canon Printer has a line feed error?
If your Canon Printer displays a line feed error, it indicates foreign material in the LF drive (gear). Remove any foreign material to fix the problem.
What to do if my Canon MG3160 Printer has a print head temperature rise error?
If your Canon Printer shows a print head temperature rise error, check the remaining ink amount and replace the ink cartridge if it's low.
How to fix Canon MG3160 when paper output cover is open?
If your Canon Printer indicates that the paper output cover is open, close the paper output cover.
How to fix Canon Printer when paper output tray is closed?
If your Canon Printer indicates that the paper output tray is closed, open the paper output tray.
Why my Canon MG3160 cannot perform automatic double-sided printing?
Automatic double-sided printing cannot be performed because the paper length is not supported for double-sided printing. Press the OK button to eject the paper. Note that the data intended for the back side of the paper will be skipped.
Details operator call errors indicated by the orange Alarm LED and their corresponding solutions.
Lists service call errors indicated by LED blinking patterns and their solutions for troubleshooting.
Explains how to enter and operate the printer's service mode using the Service Tool.
Details various adjustments like destination settings, ink absorber counter, and grease application.
Describes user mode functions such as nozzle check, print head cleaning, and alignment.
Provides specific guidance for assembling parts like carriage rails and document pressure sheets.
Explains the different ink absorber portions and their replacement methods.
Details the procedures for easy and regular replacement of main ink absorbers.
Guides on when to preventively replace ink absorbers based on life or counter values.
Covers automatic and manual print head alignment procedures for print quality issues.
Describes how ink level messages are displayed and how to handle low or no ink errors.
Introduces a new, improved service test pattern for servicing efficiency.
Explains how to clean the encoder film to resolve errors like print position mis-alignment.
Provides an exploded view of the printer's external components and their identification.
Lists all available parts with their part numbers, descriptions, and applicable models.
To Next Page
General