35
E
Mastering
the Basics
If Your TV (or VCR) Has a SCART Terminal (without S (S1)-video)
AV
IN/OUT
AUDIO
(L/ MONO)
AUDIO
(R)
VIDEO
• Connect the PC-A10 SCART adapter to the TV or VCR’s SCART terminal.
• Connect the camcorder to the adapter. Connect the camcorder using the
STV-250N Stereo Video Cable. Connect the white plug to the white audio
terminal L (left). Connect the red plug to the red audio terminal R (right).
Connect the yellow plug to the yellow video terminal VIDEO.
• If you are connecting the camcorder to a TV, set the TV/VIDEO selector on
the television to VIDEO.
• If you are connecting the camcorder to a VCR, set the input selector on
the VCR to LINE.
PC-A10
SCART Adapter
STV-250N Stereo Video Cable
• Use the S-150 S-video Cable to connect the S-video terminals. Use the
STV-250N Stereo Video Cable to connect the AUDIO terminals. Connect
the white plug to the white AUDIO terminal L (left). Connect the red plug
to the red AUDIO terminal R (right). Do not connect the yellow plug.
• If you are connecting the camcorder to a TV, set the TV/VIDEO selector on
the television to VIDEO.
• If you are connecting the camcorder to a VCR, set the input selector on the
VCR to LINE.
If Your TV (or VCR) Has an S (S1)-video Input Terminal
For higher picture quality, we recommend playing back recordings on a TV
with an S (S1) terminal.
VIDEO
S(S1)-VIDEO
INPUT
AUDIO
L
R
IN/
OUT
AV
IN/OUT
STV-250N Stereo Video Cable
S-150 S-video Cable
To Next Page
