34
E
Mastering
the Basics
Connections for Playback on a TV Screen
You can connect the camcorder to a TV or VCR in order to play back your
recordings. You will need to attach a power source to the camcorder ( 11).
Power off all devices before starting the connections.
See your TV or VCR instruction manual for further details.
IN/
OUT
AV
IN/OUT
MIC
Through the menu, the camcorder’s AV/headphone terminal can be switched
to function as either the AV terminal or the headphone terminal.
Open the menu and select VCR SET UP. Then select AV/PHONES and
set it to AV or PHONES and close the menu.
• When the terminal is switched to PHONES, PHONES appears in the display.
Using the headphones
• Make sure you switch the AV/headphones terminal to PHONES before
using headphones. If the AV/headphones terminal is not switched to
PHONES before you use the headphones, noise will come out from the
headphones.
+
,
+
,
+
,
+
( 38)
Switching the AV/Headphone Terminal
To Next Page
