Canon MV200 - Page 9

Only use videocassettes marked with the Mini D^ logo.*
-—-
Loading and unloading _
1. Make sure that you have inserted a power source.
2. Slide the OPEN button to release the cover (the camera’s grip).
• Pull the cover fully open.
3. Press the EJECT ! ► button and wait for the cassette compartment
to open.
4. Load or unload the cassette.
• Insert the cassette gently with the window facing out.
• Remove the cassette by pulling it straight out.
5. Press the fpusul mark on the compartment until it clicks, and wait
for it to close.
6. Click the cover back into place.
• Mlni Dj r is a trade mark
Notes:
• After loading a cassette, use record search (p. 39) to find the point where you
want to start recording.
• Do not interfere with the cassette compartment while it is opening or closing
automatically, or attempt to close the cover.
• Do not leave the cassette in the camera after use — return it to its case and store
it in a cool, clean, dry place.
• The holes in the back of the cassette are used for transferring information — do
not cover them.
• When a cassette is not loaded, £5$ flashes in the display.
9
Mastering
the
Basics