>
Faxing
> Sending/Receiving Faxes Using the Operation Panel of the Machine > Document Stored in
Memory
Document Stored in Memory
In the following cases, the machine is not able to print the received fax and will automatically store the fax
in its memory.
Ink has run out.
Paper has run out.
A different size of paper from that specified by Page size is loaded.
Page size is set to other than A4, 8.5"x11"(LTR), or 8.5"x14"(Legal)
(MX350 series).
OFF is selected for Auto print in FAX user settings.
You pressed the
Stop
button to cancel printing of a received fax.
Important
If you disconnect the power cord, all the documents stored in memory are deleted. Send or print
necessary documents before disconnecting the power cord. For details on how to unplug the power
cord, refer to
Notice for Unplugging the Power Cord
.
Note
When confirming, printing, or deleting a document stored in memory, you specify it by its transaction
number. If you do not know the transaction number for your target document, print the list of
documents first.
To print a document in memory:
Printing a Document in Memory
To delete a document in memory:
Deleting a Document in Memory
To save a document on a memory card or a USB flash drive
Saving a Document in Memory to a Memory Card/USB Flash Drive
Page top
Page 793 of 1127 pagesDocument Stored in Memory
To Next Page