Canon PIXMA G3200 User Manual

Printing Network Settings
Use the operation panel to print the machine's current network settings.
Important
• The network settings printout contains important information about your network. Handle it with care.
1.
Make sure machine is turned on.
2.
Load two sheets of A4 or Letter-sized plain paper.
3.
Press and hold Wi-Fi button and release it when ON lamp flashes.
4.
Press Wi-Fi button again.
The machine starts printing network settings information.
The printed network settings information is as follows:
Item Description Setting
Product Information Product information –
Product Name Product name XXXXXXXX
ROM Version ROM version XXXXXXXX
Serial Number Serial number XXXXXXXX
Wireless LAN Wireless LAN Enable/Disable
MAC Address MAC address XX:XX:XX:XX:XX:XX
WPS PIN CODE WPS PIN code XXXXXXXX
Infrastructure Infrastructure Enable/Disable
Connection Connection status Active/Inactive
SSID SSID Wireless LAN SSID
Channel *1 Channel XX (1 to 11)
Encryption Encryption method None/WEP/TKIP/AES
WEP Key Length WEP key length (bits) Inactive/128/64
Authentication Authentication method None/auto/open/shared/WPA-PSK/WPA2-PSK
Signal Strength Signal strength 0 to 100 [%]
TCP/IPv4 TCP/IPv4 Enable
IP Address IP address XXX.XXX.XXX.XXX
213

Canon PIXMA G3200 Specifications

General

Print Technology	Inkjet
Print Resolution	Up to 4800 x 1200 dpi
Print Speed (Black)	Approx. 8.8 ipm
Print Speed (Color)	Approx. 5.0 ipm
Borderless Printing	Yes
Wireless Printing	Yes
Scanner Type	Flatbed
Copier	Yes
Ink Tank System	Yes
Paper Handling	Rear Tray
Connectivity	USB
Paper Sizes	4" x 6", 5" x 7", 8" x 10", Letter, Legal, Envelope (DL, COM10)
Operating System Compatibility	Windows, Mac
Ink Type	Pigment Black and Dye Color Inks
Scanner Resolution	600 x 1200 dpi (Optical)
Dimensions (W x D x H)	17.6" (W) x 13.0" (D) x 6.6" (H)