Canon PIXMA G3200 User Manual

Cannot Find Machine on Wireless LAN
Check1
Make sure machine is turned on.
Check2
Make sure Wi-Fi lamp is lit on machine.
If the Wi-Fi lamp is off, the wireless LAN is disabled. Follow the procedure below to enable the wireless LAN.
1.
Press and hold Wi-Fi button and release it when ON lamp flashes.
2.
Press Color button, Black button, and then Wi-Fi button in this order.
When the ON lamp changed from flashing to lit and the Wi-Fi lamp lights up, and then the wireless LAN is
enabled.
Check3
If machine is temporarily connected to computer via USB cable, make sure
USB cable is connected properly.
If you set up the wireless LAN connection or change the wireless LAN settings using IJ Network Tool over a USB
connection, connect the machine and the computer using a USB cable as the illustration below. The USB port is
at the back of the machine.
Check4
Make sure machine setup is complete.
If it is not, perform setup.
•
For Windows:
Use the Setup CD-ROM or follow the instructions on the Canon website.
• For Mac OS:
Follow the instructions on the Canon website.
Check5
If using IJ Network Tool, look for machine again.
•
For Windows:
480

Canon PIXMA G3200 Specifications

General

Print Technology	Inkjet
Print Resolution	Up to 4800 x 1200 dpi
Print Speed (Black)	Approx. 8.8 ipm
Print Speed (Color)	Approx. 5.0 ipm
Borderless Printing	Yes
Wireless Printing	Yes
Scanner Type	Flatbed
Copier	Yes
Ink Tank System	Yes
Paper Handling	Rear Tray
Connectivity	USB
Paper Sizes	4" x 6", 5" x 7", 8" x 10", Letter, Legal, Envelope (DL, COM10)
Operating System Compatibility	Windows, Mac
Ink Type	Pigment Black and Dye Color Inks
Scanner Resolution	600 x 1200 dpi (Optical)
Dimensions (W x D x H)	17.6" (W) x 13.0" (D) x 6.6" (H)