Canon PIXMA MG5620 User Manual

What Is ScanGear (Scanner Driver)?
ScanGear (scanner driver) is software required for scanning documents. It enables you to specify the output
size and make image corrections when scanning.
ScanGear can be started from IJ Scan Utility or applications that are compatible with a standard interface
called TWAIN. (ScanGear is a TWAIN-compatible driver.)
What You Can Do with This Software
This software enables you to preview scan results or set document type and output size, etc. when
scanning documents. It is useful when you want to scan in a specific color tone, as it allows you to make
various corrections and adjust brightness, contrast, etc.
Screens
There are two modes: Basic Mode and Advanced Mode.
Switch modes by clicking a tab on the upper right of the screen.
Note
• ScanGear starts in the last used mode.
• Settings are not retained when you switch modes.
Basic Mode
Use the Basic Mode tab to scan easily by following three simple on-screen steps ( , , and
).
599

Canon PIXMA MG5620 Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 1200 dpi
Connectivity	Wi-Fi, USB
Scanner Type	Flatbed
Max Scan Resolution	1200 x 2400 dpi
Wireless Printing	Yes
Mobile Printing	Yes
AirPrint	Yes
Google Cloud Print	Yes
Borderless Printing	Yes
Duplex Printing	Yes
Copy Speed (Color)	4.0 ipm
Reduction/Enlargement	25% - 400%
Printer Type	All-in-One
Input Paper Capacity	100 sheets
Compatible Ink Cartridges	CLI-251
Copy Speed	7.7 ipm
Display	2.5" LCD
Functions	Print, Copy, Scan
Paper Sizes	4 x 6", 5 x 7", 8 x 10", Letter, Legal, Envelope
Color Depth	48-bit Input / 24-bit Output
Maximum Document Size	8.5 x 11.7 inches
Dimensions	18 x 14.6 x 5.9 inches
Fax Speed	No