Name: Canon PIXMA MG5620
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Cannot Detect the Machine during Wireless LAN Setup: Check 5

Does the firewall function of your security software or operation system for

computer interfere with setting up the network communication?

The firewall function of your security software or operation system for computer may limit communications

between the machine and your computer. Confirm the setting of firewall function of your security software

or operation system or the message appearing on your computer.

If the firewall function interferes with setting up:

• When the message appears on your computer:

If the message warning that Canon software is attempting to access the network appears on the

computer, set the security software to allow access.

Then click Redetect on the Check Printer Settings screen.

When the machine is detected, follow the instructions on the screen to continue to set up the network

communication.

• When the message does not appear on your computer:

Cancel to set up, then set the security software to allow Canon software* to access the network.

* On the Setup CD-ROM, select win > Driver > DrvSetup, then set the security software to allow the

file Setup.exe or Setup64.exe to access the network.

After setting the security software, try to set up the network communication from the beginning.

Note

• For the operation system firewall settings or the security software firewall settings, refer to the

instruction manual of the computer or software, or contact its manufacturer.

If there is no problem with the firewall settings:

Go to check 6.

Cannot Detect the Machine during Wireless LAN Setup: Check 6

733

Other manuals for Canon PIXMA MG5620

Questions and Answers:

Need help?

Do you have a question about the Canon PIXMA MG5620 and is the answer not in the manual?

General