Canon PIXMA MP210 Series Setup Instructions

Start Here
Easy Setup Instructions
Important
When moving the machine, carry the machine at both ends as shown below. Do
not lift the machine by grasping the Paper Support Extension.
aPlacethemachineonaatandhorizontalsurface,anddonot
placeanyobjectsinfrontofthemachine.
Removealltheshippingtapesandprotectivematerialontheoutsideofthe
machine.
ThenopenthePaperOutputTray.
bLifttheScanningUnit(PrinterCover),andpulltheScanningUnit
Supportdownintoplace.
ScanningUnit(PrinterCover)
cRemovetheprotectivematerialontherightside.
ProtectiveMaterial
Caution
Before turning on the machine, remove all of the shipping tapes.
1 Prepare the Machine
dLifttheScanningUnit(PrinterCover)slightlytosettheScanning
UnitSupportbacktoitsoriginalposition,andthengentlyclose
theScanningUnit(PrinterCover).
ePlugthepowercordinthebackofthemachineandconnectthe
otherendtothewalloutlet.
PowerCord
DocumentCover
Important
Make sure that the Document Cover is closed.
Note
DoNOTconnecttheUSBcableatthisstage.
fPresstheON/OFFbuttontoturnonthemachine.Themachine
willinitialize.Waituntilthe
Powerlampstopsashingand
remainslitgreen.
gLifttheScanningUnit(PrinterCover),andpulltheScanning
UnitSupportdownintoplace.TheFINECartridgeHolder
automaticallymovestotheleft.
ScanningUnit(PrinterCover)
h

Writedowntheserialnumberlocatedinsidethemachine.You
willneedthistoregisteryourproduct.
SerialNumber
2 Install the FINE Cartridges
aRemovetheBlackFINECartridgefromitsbox.
bRemovetheprotectivetapegently.
ProtectiveTape
PrintHeadNozzles
ElectricalContacts
Important
Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge.
The machine may not print out properly if you touch it.
Do not reattach the protective tape once you have removed it.
Be careful not to stain your hands or surrounding work area with ink on the
removed protective tape.
cInserttheBlackFINECartridgeslightlyslantedintotheleftslot
B
.
•
•
•
dPushuptheFINECartridgeuntilitclicksintoplace.
Important
For correct machine operation, make sure the FINE Cartridge is securely inserted.
Click
eRepeattheprocedurefortheColorFINECartridge,insertingit
intotherightslot
C
.
fLifttheScanningUnit(PrinterCover)slightlytosettheScanning
UnitSupportbacktoitsoriginalposition,andthengentlyclose
theScanningUnit(PrinterCover).
Important
Once you have installed the FINE Cartridges, the LED will ash green. Wait until
the LED stops ashing and displays 1. It takes about one to two minutes.
Hardware setup is complete.
Photo All-in-One
Q T 5 1 2 0 6 V 0 1
Unpack the Machine
Pleaseconrmtheincludeditemsagainsttheillustrationprintedonthelidofthepackingbox.
AUSBcableisnecessarytoconnectthemachinewithyourcomputer.
•
•
Important
When cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Machine” in the Quick Start Guide.

Canon PIXMA MP210 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 1200 dpi
Functions	Print, Scan, Copy
Print Speed (Black)	22 ppm
Print Speed (Color)	17 ppm
Scanner Type	Flatbed
Max Scan Resolution	1200 x 2400 dpi
Copy Speed (Black)	22 cpm
Copy Speed (Color)	17 cpm
Copy Resolution	600 x 600 dpi
Interface	USB 2.0
Paper Sizes	Letter, Legal
Operating System Support	Mac OS
Ink Cartridge Compatibility	PG-40, CL-41