Canon PIXMA MX310 - Ink Absorber Counter Resetting

4 times Green (Power) Ink absorber counter
resetting
Set a sheet of A4 or Letter sized plain paper in
the rear tray and reset the ink absorber counter.
After the ink absorber counter is reset, the
counter value is printed automatically.
See "Ink absorber counter resetting" below
5 times Orange (Alarm) Destination settings Press the Stop/Reset button the specified
number of time(s) according to the destination.
See "Destination settings" below.
6 times Green (Power) Print head deep
cleaning
Cleaning of both Black and Color
7 times Orange (Alarm) Return to the menu
selection
8 times Green (Power) Return to the menu
selection
9 times Orange (Alarm) Return to the menu
selection
10 times Green (Power) Return to the menu
selection
11 times Orange (Alarm) Return to the menu
selection
12 times Green (Power) Button and LCD test See "Button and LCD test" below.
13 times Orange (Alarm) Ink absorber counter
setting
See "Ink absorber counter setting" below.
14 times Green (Power) Return to the menu
selection
15 times Orange (Alarm) Return to the menu
selection
16 times or
more
Green (Power) Return to the menu
selection
Note: If the Stop/Reset button is pressed 16 or more times, the Alarm LED (orange) or Power LED (green) lights
steadily without any changes.
<Ink absorber counter resetting>
Reset the ink absorber counter (to 0%) when the ink absorber is replaced, or after the logic board is
replaced.
1) In the service mode, press the Stop/Reset button 4 times to enter the ink absorber counter resetting
mode.
2) In the ink absorber counter resetting mode, press the Stop/Reset button the specified number of time(s)
according to the kind of ink absorber whose value should be reset to 0%.
(12/32)