Cannot Print on the Disc Label
Disc Label Printing Does Not Start
Disc Tray Does Not Feed Properly
Disc Tray Jammed
Disc Label Printing Does Not Start
Check1
Is disc tray placed properly?
Place the disc tray properly again and tap OK on the touch screen.
Use the disc tray supplied with this printer ("M" is on the upper side).
For more on placing the disc tray, see Placing a Printable Disc.
Check2
Is printable disc placed on disc tray?
Place the printable disc on the disc tray properly and tap OK on the touch screen.
Use the disc tray supplied with this printer ("M" is on the upper side).
For more on placing the disc tray, see
Placing a Printable Disc.
Check3
If disc label printing stops before it is complete, try operation again.
If a certain period of time has elapsed while disc label printing is in progress, the printer stops initializing.
To resume initializing, tap OK on the touch screen.
Try the operation again following the on-screen instructions.
Disc Tray Does Not Feed Properly
Check1
Is disc tray placed properly?
Place the disc tray properly again and tap OK on the touch screen.
Make sure you are using the disc tray supplied with the printer ("M" is on the upper side).
For more on placing the disc tray, see
Placing a Printable Disc.
Check2
Unrecognizable printable disc may be placed.
Canon recommends that you use printable discs specially processed to be printed on by an inkjet printer.
376
To Next Page
Loading...
Need help?
General
