EasyManuals Logo

Canon Power Shot SX710 HS User Manual

Canon Power Shot SX710 HS
177 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
64
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Recording Various Movies
Still Images
Movies
Recording Movies in Standard Mode
Still Images
Movies
1
Enter [ ] mode.
Set the mode dial to [ ].
Press the [
] button, choose [ ] in the
menu, and then choose [ ] (
=
27).
Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
2
Congure the settings to suit the
movie (=
161).
3
Shoot.
Press the movie button.
To stop movie recording, press the movie
button again.
Recording Movies with Smoother Motion
Record movies with smoother motion, at nearly double the frame rate, as
follows.
Follow the steps in “Changing Movie
Image Quality” (
=
49) and choose
[ ].
2
Compose the shot and press the
shutter button halfway.
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3
Press the shutter button all the way
down.
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
The lamp blinks and the self-timer sound
is played.
4
Join the subjects in the shooting
area and look at the camera.
After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the ash res, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
To cancel shooting after you have
triggered the self-timer, press the
[
] button.
Even if your face is not detected after you join the others in the
shooting area, the camera will shoot about 15 seconds later.
To change the number of shots, press the [
][ ] buttons
after choosing [
] in step 1. [Blink Detection] (
=
51) is only
available for the nal shot.
The zoom factor cannot be changed with the [
] button after you
press the shutter button all the way down.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon Power Shot SX710 HS and is the answer not in the manual?

Canon Power Shot SX710 HS Specifications

General IconGeneral
Sensor1/2.3-inch CMOS
Image ProcessorDIGIC 6
Optical Zoom30x
Aperturef/3.2 (W) - f/6.9 (T)
ConnectivityWi-Fi, NFC
BatteryNB-6LH
TypeCompact Digital Camera
Image stabilizationIntelligent IS
Weight269 g (including battery and memory card)
Digital Zoom4x
Dimensions112.7 x 65.8 x 34.8 mm
Storage MediaSD/SDHC/SDXC Memory Cards
ISO RangeISO 80-3200
Display3.0-inch LCD
Video Resolution1920 x 1080 (Full HD)
Image Sensor1/2.3 type CMOS
Shutter Speed1 – 1/3200 sec.
LCD Screen Resolution461, 000 dots
Video Frame Rate60 fps
Battery LifeApprox. 230 shots
Focal Length4.5 (W) - 135.0 (T) mm
ISO sensitivityAUTO, 80, 100, 200, 400, 800, 1600, 3200

Related product manuals