10
Playback
1 Set the mode dial to
(playback) (a).
2 Display the image you
wish to view.
Use the W or X button to select the image (b).
Use the W button to move to the previous image and the X button to move
the next image.
Erasing
1 Set the mode dial to
(playback) (a).
2 Use the W or X button to
select the image you wish
to erase (b).
3 Press the button (c).
4 Confirm that [Erase] is
selected (d) and press the
FUNC./SET button (e).
To exit instead of erasing, select
[Cancel].
Î
See the Advanced Guide to verify the advanced playback function.
Î
See the Advanced Guide: Viewing Movies (p. 58)
Î
See the Advanced Guide: Erasing All Images (p. 64)
Please note that erased images cannot be recovered. Exercise adequate
caution before erasing an image.
a
b
d
e
c
b
a
Playback
To Next Page
Loading...
