16
2 Connecting the camera to a computer.
1. Use the supplied interface cable to connect the computer's USB
port to the camera's DIGITAL terminal.
With your fingernail on the left edge of the camera's DIGITAL terminal
cover, open it forward and plug the interface cable in all the way.
2. Set the mode dial to
(playback) (a), turn on the power
(b).
The camera and computer will be
able to communicate.
Always grasp the connector's sides to remove the interface cable
from the camera's DIGITAL terminal.
If the Digital Signature Not Found window appears, click [Yes]. The USB driver
will automatically finish installing onto the computer when you attach the camera
and open a connection.
USB Port
DIGITAL Terminal
Interface Cable Interface Cable
Downloading Images to a Computer
To Next Page
Loading...
