Canon PowerShot ELPH 520 HS User Manual

Shooting Range and Focusing
118
As long as you keep the shutter button pressed halfway, the focus and
exposure are locked. You can recompose shots as needed before shooting.
This feature is called Focus Lock.
Focus.
z Aim the camera so that the subject is
centered, and then press the shutter button
halfway.
z Confirm that the AF frame displayed around
the subject is green.
Recompose the shot.
z Keeping the shutter button pressed halfway,
move the camera to recompose the shot.
Shoot.
z Press the shutter button all the way down.
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long as
you press the shutter button halfway.
Configure the setting.
z Press the n button, choose [Servo AF]
on the 4 tab, and then choose [On] (p. 40).
Focus.
z The focus and exposure are maintained
where the blue AF frame is displayed while
you are pressing the shutter button halfway.
Recomposing Shots While the Focus is Locked
Still Images
Shooting with Servo AF
Still Images

Canon PowerShot ELPH 520 HS Specifications

General

Sensor Type	CMOS
Sensor Size	1/2.3 inch
Megapixels	10.1 MP
Optical Zoom	12x
Digital Zoom	4x
LCD Screen Size	3.0 inch
LCD Monitor Resolution	461, 000 dots
Video Resolution	1920 x 1080 (Full HD)
Image Stabilization	Optical
ISO Range	100 - 3200
ISO Sensitivity	Auto, 100, 200, 400, 800, 1600, 3200
Focusing System	TTL Autofocus
Continuous Shooting Speed	Approx. 3.4 fps
Video Recording	Yes
Battery Type	NB-11L
Weight	Approx. 145 g (including battery and memory card)
Shutter Speed	15 - 1/2000 sec.