Canon PowerShot ELPH 520 HS User Manual

Shooting Range and Focusing
119
You can change default camera operation of constantly focusing on subjects
it is aimed at, even when the shutter button is not pressed. Instead, you can
limit camera focusing to the moment you press the shutter button halfway.
z Press the n button, choose [Continuous
AF] on the 4 tab, and then choose [Off]
(p. 40).
• Focusing may not be possible in some shooting conditions.
• In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway. In this
case, the focus and exposure are set according to the specified AF
frame mode.
• If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter button,
and then press it halfway again.
• AF lock shooting is not available.
• [AF-Point Zoom] on the 4 tab is not available.
• Not available when using the self-timer (p. 54).
Changing the Focus Setting
Still Images
On
Helps avoid missing sudden photo
opportunities, because the camera
constantly focuses on subjects until you
press the shutter button halfway.
Off
Conserves battery power, because the
camera does not focus constantly.

Canon PowerShot ELPH 520 HS Specifications

General

Sensor Type	CMOS
Sensor Size	1/2.3 inch
Megapixels	10.1 MP
Optical Zoom	12x
Digital Zoom	4x
LCD Screen Size	3.0 inch
LCD Monitor Resolution	461, 000 dots
Video Resolution	1920 x 1080 (Full HD)
Image Stabilization	Optical
ISO Range	100 - 3200
ISO Sensitivity	Auto, 100, 200, 400, 800, 1600, 3200
Focusing System	TTL Autofocus
Continuous Shooting Speed	Approx. 3.4 fps
Video Recording	Yes
Battery Type	NB-11L
Weight	Approx. 145 g (including battery and memory card)
Shutter Speed	15 - 1/2000 sec.