Canon PowerShot ELPH 520 HS User Manual

Viewing
129
To check the focus of your shots, you can magnify the area of the image that
was in the AF frame at the time of shooting.
Access Focus Check.
z Press the p button (p. 128).
X A white frame is displayed where the AF
frame was when the focus was set.
X Gray frames are displayed over faces
detected later, in Playback mode.
X The portion of the image in the orange frame
is magnified.
Switch frames.
z Move the zoom lever toward k once.
X The screen at left is displayed.
z To switch to a different frame when there are
multiple frames, press the m button.
Zoom in or out, or view other image
areas.
z As you examine the focus, use the zoom
lever to zoom in or out. Press the opqr
buttons to adjust the display position.
z Press the n button to restore the original
display in step 1.
Checking the Focus
Still Images

Canon PowerShot ELPH 520 HS Specifications

General

Sensor Type	CMOS
Sensor Size	1/2.3 inch
Megapixels	10.1 MP
Optical Zoom	12x
Digital Zoom	4x
LCD Screen Size	3.0 inch
LCD Monitor Resolution	461, 000 dots
Video Resolution	1920 x 1080 (Full HD)
Image Stabilization	Optical
ISO Range	100 - 3200
ISO Sensitivity	Auto, 100, 200, 400, 800, 1600, 3200
Focusing System	TTL Autofocus
Continuous Shooting Speed	Approx. 3.4 fps
Video Recording	Yes
Battery Type	NB-11L
Weight	Approx. 145 g (including battery and memory card)
Shutter Speed	15 - 1/2000 sec.