Why is the built-in flash not firing on my Canon PowerShot G1 Digital Camera?
If the built-in flash on your Canon Digital Camera isn't firing, it might be due to the FLASH UNIT. Check for any abnormalities in the mounting of probable faulty parts or connector connections. If that doesn't solve the problem, consider replacing probable faulty parts.
What to do if my Canon PowerShot G1 will not record?
If your Canon Digital Camera is not recording, make sure the main dial is set to (Shooting). If the orange indicator is flashing, wait until it shines steadily, indicating the flash is charged, before pressing the shutter button. Also, ensure that the CF card is not full, and if it is, insert a new one or download the images to a computer and erase them from the card. Finally, the CF card might need formatting. If reformatting doesn't work, the CF card logic circuits may be damaged.
What to do if Canon PowerShot G1 battery pack will not charge?
To resolve the issue of the battery pack not charging on your Canon Digital Camera: * Ensure the main dial is set to . * Replace the battery pack if its life has exceeded. * Plug the compact power adapter's DC plug more firmly into the camera's DC IN terminal and ensure the power cord is securely connected to both the adapter and the electrical outlet.
What to do if my Canon Digital Camera model appears in the 'Scanners and Cameras Properties' device list?
If your Canon Digital Camera model appears in the 'Scanners and Cameras Properties' device list, select the name of your camera model and click the [Remove] button.
How to fix a Canon Digital Camera that will not operate?
If your Canon Digital Camera is not operating, check the following: * Ensure the main dial is not set to . * Confirm that both the battery cover and CF card slot cover are securely closed. * If '[Lb]' flashes, fully charge the battery or use a household power source. * Wipe the battery terminals with a clean, dry cloth to ensure good contact.
What to do if Canon PowerShot G1 Digital Camera shows power off error?
If your Canon Digital Camera is displaying a 'POWER OFF ERROR', it could be because the battery or DC plug was removed while the image was being recorded to the CF Card/Micro Drive. Try restarting the camera.
Why is the external flash not firing on my Canon Digital Camera?
If the external flash on your Canon Digital Camera isn't firing, the issue might stem from the TOP MODULE UNIT(IC1/CN1). Check for any abnormalities in the mounting of probable faulty parts or connector connections. If that doesn't resolve the problem, consider replacing probable faulty parts.
Why is the image not reversed when LCD Monitor is rotated on Canon PowerShot G1?
If the image is not reversed even when you rotate the LCD Monitor on your Canon Digital Camera, the issue might be with the HINGE UNIT. Check for any abnormalities in the mounting of probable faulty parts or connector connections. You could also try replacing probable faulty parts.
What to do if my Canon PowerShot G1 model name does not appear in the 'Scanners and Cameras Properties' device list?
If the camera model name does not appear in the 'Scanners and Cameras Properties' device list, double-click the [System] icon in the Control Panel and check the [Device Manager] tab.
Why won't the flash fire on my Canon PowerShot G1?
If the flash on your Canon Digital Camera will not fire, ensure that the flash is set to Auto or On, not Off.
General| Optical zoom | 3x |
|---|---|
| Digital zoom | 2x |
| Sensor Type | CCD |
| Sensor Size | 1/1.8 inch |
| ISO Range | 50, 100, 200, 400 |
| Shutter Speed | 8 - 1/1000 sec |
| Supported Flash Memory | CompactFlash (Type I) |
| Battery | BP-511 |
| Camera type | Compact digital camera |
| Optical Sensor Resolution | 3.34 megapixels |
| Image Processor | DIGIC |
| Lens | 7-21mm (35mm equivalent: 34-102mm) |
| Aperture Range | f/2.0-2.5 |
| LCD Screen | 1.8 inch |
| Storage | CompactFlash Card |
To Next Page