16
Before Use
Basic Guide
Advanced Guide
Camera Basics
Index
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback
Wireless Features
Setting Menu
Accessories
Appendix
Remove the memory card.
● Push the memory card in until it clicks,
and then slowly release it.
● The memory card will pop up.
Setting the Date, Time, and Time Zone
Set the current date and time. Information you specify this way is recorded
in image properties when you shoot, and it is used when you manage
images by shooting date or print images showing the date.
1
Turn the camera on.
● Press the power button.
● The [Date/Time/Zone] screen is
displayed.
2
Set the time zone.
● Press the / buttons to choose the
item, and then press the button.
3
Check your card’s write-protect
switch and insert the memory card.
● Recording is not possible on memory
cards with a write-protect switch when the
switch is in the locked position. Move the
switch toward (1).
● Insert the memory card with the label (2)
facing as shown until it clicks into place.
● Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
4
Close the cover.
● Lower the cover (1) and hold it down as
you slide the switch, until it clicks into the
closed position (2).
Removing the Battery Pack and Memory Card
Remove the battery pack.
● Open the cover and press the battery
lock in the direction of the arrow.
● The battery pack will pop up.
(
2
)
(
1
)
(
1
)
(
2
)
To Next Page
Loading...
Need help?
General
