•
Do
not carry or store the battery pack with metal objects with sharp edges, such as
paper clips and pins. Always
put
the terminal cover on the battery pack's terminal when
carrying
it
or
before storing it.
• Remove the battery pack when the printer is not in use.
The
battery pack continues
to
discharge a small amount when left in the printer even with
the
power
turned off. This shortens the battery life.
• The printer consumes the battery charge when the power is on even when a function is
not being used.
To
conserve the battery charge, be particularly attentive in turning the
power off.
• Although the battery pack's maximum operating range is 5 to
40°C
(41
to
104
OF),
the
optimal range is
10
to
30°C
(50 to
86
OF).
At cold temperatures, such as those experienced on ski hills, performance will temporarily
decline, reducing the usable time.
• If the battery status is low, the finished print may not be ejected
into
the print output
receptacle completely.
If this happens, gently pull out the paper.
• When the printer is not in use, remove the battery pack, replace its terminal cover and
store
it
in a cool place
(30
°C/86 of or less).
Charge it before using it again.
• This is a lithium ion battery pack so there is no need to completely use
or
discharge
it
before recharging.
It can be charged
at
any charge state.
• It takes approximately 150 minutes to bring a fully discharged battery pack
to
a full
charge state (based on standard Canon testing criteria).
• Charge it within a temperature
range
of 5 to
40°C
(41
to
104
OF).
• The charging time varies according
to
the ambient temperature
and
charge
state.
• The charge adapter
may
emit noises while charging. This is not a malfunction.
•
Do
not charge the battery
pack
for more
than
24
continuous hours
to
avoid
performance
loss.
•
You
are advised to charge the battery on the day
of
use, or one day before,
to
ensure a
full charge.
Even charged battery packs continue to discharge naturally.
• Storing a
fully
charged battery pack for long periods
of
time (about 1 year) can shorten
its Iifecycle
or
affect performance.
You
are recommended to discharge the battery pack fully
in
the printer before storing it.
• If you
do
not use the battery pack for long periods
of
time, charge it fully and discharge
it fully in the printer at least once a year before returning it
to
storage.
• If the usable time
of
a battery pack diminishes SUbstantially even when fully charged,
it should be replaced.
•
17
To Next Page
Loading...
Need help?
General
