~
Lamp
indications
STATUS
lamp
Off
CHARGE lamp Status
~~~~~~~
Off Power off (Not charged)
Blinks slowly
green
Charging in progress (Power off)
Charging complete (Power off)*1 Lights green
Off
-----
Blinks slowly
white
Blinks white
Blinks quickly
white
Lights white
Off
Off
Off
Blinks green
Blinks slowly
green
Lights green
Blinks slowly red Blinks slowly
green
Blinks red Off
Blinks green
Blinks quickly red Off
Blinks quickly
green
Printer start-up in progress
Processing .
..
Remove the printed paper.
Standing
by
to print (Not charged)*2
Standing
by
to print (Battery level low)
Standing
by
to print (Charging in progress)
Standing by to print (Charging complete)
Outside the operating temperature range so
charging has paused.
An error occurred. Check the app message.
The battery level is low so printing is not
possible. Charge the battery.
An error occurred. Turn the power off and
then on again.
A battery error occurred.
*1
After
a while, the CHARGE lamp turns
off
.
- I
*2 You can check the battery level by pressing the Power button in the Standing
by
to
print (Not charged) status.
• CHARGE lamp blinks two times:
The battery level is low, but the printer can still be used.
• CHARGE lamp blinks three times:
The battery level is sufficient.
5
To Next Page
Loading...
Need help?
General
