204
[User Name], [Password], [POP Server]
Enter the user name and password needed for authentication, and the POP server host name or IP address when e-mail
authentication is set to [POP before SMTP].
Enter the user name and password needed for authentication when e-mail authentication is set to [SMTP-AUTH].
[Subject]
Enter the subject of the e-mail in alphanumeric characters.
[Log Notification Test]
Clicking [Exec] initiates an e-mail notification test based on the settings currently entered.
If something other than [None] is selected for [Authentication], click [Exec] before clicking [Apply] after entering the
[Password].
To Next Page
Loading...
