Canon VB-H45 - User Manual

Work Support Manual
"Device Startup"
[Ver. 1.3] March 2019
* This manual is still in
development, and is provided
only for supplemental use in
verification procedures. It should
not be distributed to the general
public. Please be aware that
some of the information that is
included is not complete, and
that it should only be used as a
reference for launching the
platform.

Summary

Camera Settings and Configuration

Reset Camera to Factory Defaults

Step-by-step guide to restore camera to its original factory default configuration.

Connect Camera to PC for Configuration

Configure PC Network Settings for Camera

Register Camera Administrator and IP Address

Process for setting up user credentials and a static IP for camera access.

Adjust PC IP Address for Camera Network

Vision Edition Settings and Workflow

Register Network Camera in Vision Edition

Adds the network camera to the Vision Edition software using its configured IP and credentials.

Edit Vision Edition Flowchart

Configure Capture Settings and Register Master Image

Sets up image capture parameters and registers a reference image for comparison.

Edit 2 D Code Recognition Unit Settings

Configures the region and parameters for identifying 2D codes within the image.

Configure Main Screen Validation Settings

Operation Check and Verification

Perform Debugging in Offline Mode

Executes and tests the image processing JOB in a simulated offline environment.

Prepare for Online Operation Mode

Perform Operation in Online Mode

Canon VB-H45 Specifications

General

Full HD	Yes
Total megapixels	2.1 MP
Maximum resolution	1920 x 1080 pixels
Video compression formats	H.264
Supported graphics resolutions	320 x 180, 320 x 240, 480 x 270, 640 x 360, 640 x 480 (VGA), 960 x 540, 1280 x 720 (HD 720), 1280 x 960, 1920 x 1080 (HD 1080)
Digital zoom	40 x
Optical zoom	20 x
Focal length range	4.7 - 94 mm
Maximum aperture number	3.5
Minimum aperture number	1.6
Form factor	Dome
Mounting type	Ceiling
Product color	Silver
Type	IP security camera
PTZ modes	Digital PTZ
Certification	EN55032 Class B, FCC part15 subpart B Class B, ICES-003 Class B, VCCI Class B, RCM AS/NZS EN55032 Class B, CNS13438 Class B, KN22 Class B, EN55024, KN24, EN50581, IEC/UL/EN60950-1
Placement supported	-
Light exposure modes	Aperture priority AE, Auto, Manual, Shutter priority AE
Connectivity technology	Wired
Number of users	30 user(s)
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.1x, IEEE 802.3at
Ethernet LAN (RJ-45) ports	1
Audio formats supported	G.711
AC input voltage	24 V
DC output voltage	12
Power source type	AC, DC, PoE
Power consumption (max)	9.9 W
Power consumption (typical)	8.6 W
Power consumption (Power over Ethernet (PoE))	9.2 W
Pan speed	150 °/sec
White balance	Auto, Daylight, Fluorescent, Halogen, Manual, Mercury lamp, Sodium lamp
Camera shutter speed	1 - 1/6000 s
Minimum illumination	0.003 lx
Behavior analysis	Object removal detection
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	5 - 85 %
Sensor type	CMOS
Optical sensor size	1/3 \
Effective sensor resolution	- pixels
Security algorithms	EAP-MD5, EAP-PEAP, EAP-TLS, EAP-TTLS, IPSec, SNMP, SNMPv3, SSL/TLS
Alert notification type	E-mail
Intelligent Video Surveillance (IVS) system features	Abandoned object, Intrusion
Audio input	3.5mm
Built-in HDD	No
Compatible memory cards	SD, SDHC, SDXC

Weight and Dimensions

Height	155 mm
Weight	1140 g
Diameter	132 mm