Do you have a question about the Canon VB-R11VE and is the answer not in the manual?
Camera Type | Network Camera |
---|---|
Maximum Resolution | 1920 x 1080 |
IR Illuminators | No |
Video Compression | H.264, MJPEG |
Audio Compression | G.711, G.726 |
Ethernet | 10Base-T/100Base-TX |
Weather Resistance | IP66 |
Vandal Resistance | IK10 |
Image Sensor | 1/3-type CMOS |
Effective Pixels | Approx. 2.1 Megapixels |
Angle of View (Vertical) | 34.3° (Wide) - 1.8° (Tele) |
Day/Night | Yes, IR cut filter |
Frame Rate | 30 fps |
Audio Input/Output | 1 input/1 output |
Protocols | HTTP, HTTPS, FTP, RTSP, ONVIF |
Security | Password protection, IP address filtering |
Local Storage | SD card slot (SD/SDHC/SDXC) |
Power | PoE (Power over Ethernet) |
Operating Temperature | -10°C to 50°C |
Shutter Speed | 1/1 to 1/10000 sec |
Operating Humidity | 20% to 80% (non-condensing) |
Details user responsibilities and recommendations for securing the network camera against breaches.
Highlights essential warnings to prevent injury, death, or property damage when using the camera.
Outlines the step-by-step process from pre-installation preparation to actual camera setup.
Explains how to configure security settings to prevent blocking of camera operations.
Explains how to start the Camera Angle Setting Tool and connect to the camera.
Details how to set the camera's angle and zoom ratio using the tool's interface elements.
Details how to configure LAN, IPv4, IPv6, and DNS settings for camera network connectivity.
Provides steps to change the default administrator password for system security.
Explains how to set video transmission size and quality for JPEG and H.264 formats.
Lists common problems and their countermeasures for camera operation and software.