What to do if I forgot my Canon Security Camera password?
If you've forgotten your password, you can initialize all settings of the camera, excluding date and time, using the reset switch. The administrator password required for initialization is “camera”. Note that network settings such as the IP address and subnet mask will be initialized and must be set again.
How to troubleshoot a Canon Security Camera that does not start?
If your camera isn't starting, check the following: * If you're using a PoE HUB, ensure the LAN cable is correctly connected. * If using an optional AC adapter, verify it's properly connected. * Try turning the camera off and on again.
Why is the top page of my Canon VB-M700F Security Camera not displayed?
If the top page of the camera isn't displaying, check these items: * Ensure the LAN cable is correctly connected. * Verify the network to which the camera is connected is set up correctly, specifically the IP address, subnet mask, and default gateway address are within supported ranges. * If you changed the IP address, reboot the camera for the new address to take effect. * Confirm the correct URI (camera IP address) is entered in your web browser.
What to do if video is not displayed on my Canon VB-M700F Security Camera?
If the video is not displayed, consider the following: * Adjust image size, quality and frame rate settings to improve video quality. * Note that the camera can only support up to 30 viewers simultaneously. If this limit is exceeded, video will not be displayed.
Why VB Initial Setting Tool does not operate with my Canon VB-M700F?
If the VB Initial Setting Tool isn't operating, consider these potential causes: * Ensure the LAN cable is correctly connected. * Try turning the camera off and on again. * Verify that the camera and the PC running the VB Initial Setting Tool are connected to the LAN in the same segment. * The VB Initial Setting Tool may not function when the Windows Firewall is enabled. * Check if you are using an older version of the VB Initial Setting Tool.
Why is there no audio from my Canon VB-M700F Security Camera?
If there is no audio, check the audio server settings of the camera and also check the sound and audio device settings for the PC. If you are using the Admin Viewer with the administrator authorities, check if the camera is connected to the RM-Lite Viewer or another viewer that lets the administrator use audio. Audio cannot be received if you are using a proxy server, when connected via SSL encrypted communications or during IPv6 connection. Also, audio cannot be used if add-ons are not installed.
What to do if Camera Angle Setting Tool does not operate for Canon Security Camera?
If the Camera Angle Setting Tool isn't working, check these items: * Ensure the LAN cable is correctly connected. * Verify the camera and the PC running the Camera Angle Setting Tool are connected to the LAN in the same segment. * If you see the message “Could not launch application. Install .NET Framework 3.5 (SP1 or later).”, install .NET Framework 3.5 (SP1 or later) or enable settings.
Why data cannot be uploaded from my Canon VB-M700F Security Camera?
If data cannot be uploaded, verify the upload destination in the [Upload] menu, and the upload operation upon event in the [Event] menu, to ensure both are set correctly. You can perform an operation check based on the currently set upload destination by running a test from the [Upload] menu. Check [View Logs] in the [Maintenance] menu or logs on the server to check the detailed operating environment. For the server settings, contact your System Administrator.
Why does the viewer get disconnected from my Canon VB-M700F?
If the viewer gets disconnected, check the network and PC for any abnormalities. Try rebooting the PC and connecting again.
Why the Canon Security Camera cannot be controlled?
If you connect the Admin Viewer as an administrator, you will have exclusive possession of the camera control privileges. If you connect to the Admin Viewer as an Authorized User, you cannot control the camera unless the administrator releases camera control.
General| Aperture | F1.4 |
|---|---|
| Video Compression | H.264, MJPEG |
| Maximum Frame Rate | 30 fps |
| Resolution | 1920 x 1080 (Full HD) |
| Audio Compression | G.711 |
| Network Interface | 10Base-T / 100Base-TX |
| Protocols | IPv4, IPv6, HTTP, HTTPS |
| Security | IP address filtering, HTTPS encryption, IEEE 802.1X, Password protection |
| Power Source | PoE (IEEE 802.3af) |
| Power Consumption | Max. 6.5 W |
| Operating Temperature | -10°C to 50°C |
| Lens | Fixed lens |
Critical warnings to prevent injury, death, or property damage.
General safety guidelines and prohibited actions during camera use.
Overview of the camera's common and model-specific capabilities.
Steps to prepare the camera, including software installation and initial setup.
Instructions for installing essential software like the VB Initial Setting Tool.
Guide to configuring the camera's network settings using the VB Initial Setting Tool.
How to adjust the camera's pan, tilt, and zoom using the dedicated tool.
Explains the login process and default credentials for accessing camera features.
Configuration of network settings, including passwords and IP addressing.
Configuring camera startup settings and naming external devices.
Adjusting video parameters like resolution, quality, and frame rate.
Configuring event triggers and actions like detection and timers.
Managing user accounts, authorities, and access restrictions.
Managing SD memory card operations, saving, and information.
Accessing logs, viewing status, and performing maintenance tasks.
Tool for masking sensitive areas in the camera's view.
Tool to limit the viewable capture range in the viewer.
Tool for setting camera presets and home positions.
Configures smart detection features like motion and tampering detection.
Utility for viewing and analyzing camera operating logs.
Defines user roles and their associated permissions for camera control.
Common problems and their solutions for camera operation.
Procedures for resetting camera settings to factory defaults.
To Next Page
