Need help?Do you have a question about the Canon VB-M740E and is the answer not in the manual?
General| Camera Type | Network Camera |
|---|---|
| Maximum Resolution | 1920 x 1080 |
| Video Compression | H.264, MJPEG |
| Ethernet | 10Base-T / 100Base-TX |
| Image Sensor | 1/3" CMOS |
| Effective Pixels | 2.1 Megapixels |
| Aperture | F1.6-3.5 |
| Audio Compression | G.711 |
| Protocols | IPv4, IPv6, HTTP, HTTPS, FTP |
| Power Source | PoE |
| Operating Temperature | -10°C to +50°C (14°F to 122°F) |
Provides a step-by-step guide for setting up the network camera, from preparation to connection.
Guides users through the process of installing necessary software from the setup CD-ROM.
Explains how to adjust computer and web browser security settings to prevent blocking camera access.
Details the process of making initial network and camera settings using the Camera Management Tool.
Explains how to launch the tool and establish a connection to the camera for angle adjustment.
Covers essential network settings for connecting the camera via IPv4, IPv6, and DNS.
Instructs on changing the default administrator password for enhanced system security.
Details how to configure video recording to a memory card upon event triggers.
Covers configuring separate access controls for IPv4 and IPv6 addresses to manage host access.
Provides instructions for configuring IPsec settings for secure network communication.
Guides users on launching the Admin Viewer to check camera status and view live video.
Explains how to use the pan, tilt, and zoom controls to adjust the camera angle.
To Next Page
