Canon VC-C4 - Factory Default Settings

34
Factory Default Settings
When the Product is shipped from the factory or when RESTORE DEFAULT has been set to
[YES] (→ P.28), the settings are set to the default values shown below.
(Camera Default Settings)
Item Default Item Default
Focus
*
Auto Preset None
Brightness
*
Normal Clock and Text Not displayed
(Setting Screen Default Settings)
Item Setting
BAUD RATE 9600
STOP BIT 1
SET MENU
DATA 8 BIT Read only
NON PARITY Read only
REMOTE CONTROLLER ID 0
COMMAND VC-C4 MODE
DATE DISPLAY ON
TIME DISPLAY ON
TXT DISPLAY ON
DISPLAY MENU
SET DATE
*
01.JAN.’00
SET TIME
*
00:00:00AM
TIME STYLE
*
AM/PM
DATE STYLE
*
DD/MM/YY
Specified text
*
None
PAN SPEED AUTO (10 for MANUAL)
TILT SPEED AUTO (10 for MANUAL)
CAMERA MENU
MOVABLE RANGE DEFAULT
DIRECTION MIRROR OFF
AE REFERENCE DEFAULT (5 for MANUAL)
FLICKERLESS AE OFF
*
Settings marked with an asterisk revert to the factory default values when the power is switched
off and then on again (→ P.14). The values for all other settings are saved when the power is
turned off.