EasyManuals Logo

Canon VIXIA HF G50 User Manual

Canon VIXIA HF G50
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
Exposure Adjustment
44
ND Filter
Using the ND filter allows you to open up the aperture to obtain a shallower depth of field even when
recording in bright surroundings. You can also use the ND filter to avoid the soft focus caused by
diffraction when using small apertures. The ND filter can be set when the aperture value is F4.0.
This function can only be used when the shooting mode is set to , , or n.
1 Select [ND Filter].
> [v # Camera Setup] > [ND Filter]
2 Select the desired option and then select [X].
ND filter operation
NOTES
The ND filter is not available with the [T Fireworks] Special Scene mode.
The ND filter will be set to [k Automatic] when the camera mode is or the shooting mode is
set to a Special Scene mode (except for [T Fireworks]).
Using the Zebra Pattern
You can use the zebra pattern to identify areas that might be overexposed, so you can correct the
exposure appropriately. The camcorder offers two levels of zebra pattern: With 100% only areas that
will lose detail in the highlight areas will be identified, while 70% will identify also areas that are
dangerously close to losing detail.
1 Select the aperture, shutter speed, gain or exposure compensation.
Aperture: [FUNC] > [ Aperture]
Shutter speed: [FUNC] > [ Shutter Speed]
Gain: [FUNC] > [ Gain]
Exposure compensation: [FUNC] > [y Exposure Comp.]
2 Select the desired zebra level.
[] > [z 70%] or [{ 100%] > [X]
To turn off the zebra pattern, select [ Off] instead.
To return to the previous screen and adjust other settings, select [L] instead of [X].
The zebra pattern will appear on the overexposed areas of the picture.
NOTES
Using the zebra pattern will not affect your recordings.
ND filter option Shooting mode Description
[k Automatic] , n When the aperture value is F4.0, you can select the ND filter setting manually.
, The camcorder will use the ND filter automatically for automatic exposure.
[j Off] , n The ND filter will not be used.
, The camcorder will not use the ND filter for automatic exposure.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon VIXIA HF G50 and is the answer not in the manual?

Canon VIXIA HF G50 Specifications

General IconGeneral
Sensor1/2.3-inch CMOS
Optical Zoom20x
Image ProcessorDIGIC DV 6
Built-in Wi-FiNo
BatteryBP-820
Minimum Focusing Distance10mm (Wide), 1m (Tele)
Recording MediaSD/SDHC/SDXC memory cards
Focus SystemHybrid AF
ResolutionApprox. 8.29 Megapixels (Effective)
LCD Screen3.0-inch touch panel
Recording FormatMP4
35mm Equivalent Focal Length29.1-601mm
Aperturef/1.8 - f/2.8
Viewfinder0.24-inch Color Viewfinder
Video Resolution3840 x 2160
Audio RecordingLinear PCM
Memory Card SlotSD/SDHC/SDXC
ConnectivityHDMI, USB
AudioDolby Digital 2ch, Linear PCM 2ch

Related product manuals