EasyManua.ls Logo

Canon XC15 - Using Looks

Canon XC15
170 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
71
Using Looks
Menus
Table of Contents Index
Using Looks
The camcorder can shoot using looks—settings that affect the image-related characteristics of the picture.
The camcorder has several pre-installed looks available and you can even create your own user-defined look
based on one of the pre-installed looks. This function is available when the shooting mode is set to n, , ,
or .
Selecting a Pre-installed Look
1 Touch [FUNC.] and then touch [Looks] (in mode) or [Looks] (in mode).
2 Select the desired option and then touch [X].
The selected icon will appear on the left side of the screen.
For settings other than [ Canon Log], you can adjust the settings with the procedure below before
touching [X].
Touching [WFM] will display the waveform monitor (A 83).
Options (for clips)
Operating modes:
[ Standard]: Standard profile for general video shooting situations.
[ Cinema EOS Std.]: Reproduces the look of an EOS digital cinema camera when [Color Matrix] is set to
[Video].
[ Neutral]: Reproduces the look of an EOS digital cinema camera when [Color Matrix] is set to
[Neutral].
[ Production Camera]: Reproduces the look of an EOS digital cinema camera when [Color Matrix] is set to
[Production Camera]. Uses the same gamma curve as that of [ Wide DR].
[ Color Matrix Off]: Reproduces the look of an EOS digital cinema camera when [Color Matrix] is set to [Off].
[ Canon Log]: Creates a picture with wide dynamic range that is suitable for processing in post-
production.
[ EOS Std.]: Approximates the look of an EOS digital SLR camera when the picture style is set to
[Standard] P.
[ Wide DR]: Applies a gamma curve with a wide latitude and colors appropriate for the gamma curve.
[ Highlight Priority]: Creates a picture with a natural gradation in tones and reduces overexposure in bright
areas by not compressing highlights. When playing back a clip recorded with this setting,
we recommend increasing the monitor’s overall brightness.
[ v User Setting 1],
[ v User Setting 2]:
Allows you to create a customized look. Start with one of the pre-installed looks and
adjust the settings as necessary.

Table of Contents

Other manuals for Canon XC15

Related product manuals