Canworld CDE360-4T022G/030L - User Manual

CDE360 Vector Control AC Drive Preface
Preface
Thank you for purchasing CDE360 Vector Control AC Drive developed by Shenzhen Canworld
Electrical Technology Co., Ltd.
The CDE360 series AC drive is a general-purpose high-performance vector control AC drive, which
is widely used for simple fan and pump driving, and automatic controlling in specific industry
equipment of Textile, Stone sawing machine, Air compressor, Spindle servo drive, Crane, Veneer
peeling machine, line cutting machine, oil-fields and wire drawing machine. It can also provide
all-in-one solution for the application of ball crusher, injection molding machine and intelligent motor.
This manual describes the notes and guidance of selection, installation, parameter setting, field
debugging, fault diagnostics and daily maintenance. Read and understand the user manual before
use and forward the manual to the end user.
Notes
 The drawings in the user manual are sometimes shown without covers or protective guards.
Remember to install the covers and protective guards according to the user manual, then
perform operations in accordance with the instructions.
 The drawings in the manual are shown for description only and may not match the product
that you purchased.
 The instructions are subject to change without notice, due to product upgrade and the
efforts to increase the accuracy and convenience of the user manual.
 Contact our agents or customer service center if you need to purchase this user manual.
 Contact our customer service center if you have problems during the use.
Service hot line: +86 4000-888-699 Fax: +86 755-26617646
Version: V1.1

Summary

Chapter 1 Safety Information and Precautions

1.1 Safety Information and Precautions

Details safety guidelines and precautions to be followed before, during, and after installation.

1.2 General Precautions

Provides general safety precautions related to earthing, motor insulation, thermal protection, and operational guidelines.

Chapter 2 Product Information

2.1 CDE360 Technical Specifications

Lists the detailed technical specifications of the CDE360 AC drive, including performance and basic functions.

2.4 CDE360 Model and Technical Parameters

Details the various models of the CDE360 series and their corresponding technical parameters.

Chapter 3 Mechanical and Electrical Installation

3.1 Mechanical Installation

Covers the requirements for mechanical installation, including environment and direction.

3.2 Electrical Installation

Details the steps and considerations for electrical installation of the AC drive and related components.

Chapter 4 Operation, Display and Application

4.1 Keypad Interface

Describes the interface and layout of the AC drive's keypad.

4.5 Monitor Parameters

Details how to monitor various parameters of the AC drive and available display options.

4.6 Parameters Upload and Download

Explains the process of backing up and copying AC drive parameters.

4.7 Password and Parameter Setting

Covers the functions for setting and managing user passwords and parameter values.

Chapter 5 Parameter List Table

Chapter 6 Parameters Description

A1 Fault & Diagnostics

Provides a detailed list of fault codes and their corresponding types and causes.

C0 Digital Input

Chapter 7 Fault Detection and Diagnostics

7.1 Faults and Solutions

Lists common faults, their possible causes, and recommended solutions for troubleshooting.

7.2 Common Faults and Solutions

Chapter 8 Communication Protocol

Chapter 9 Maintenance

9.1 Routine Repair and Maintenance

Canworld CDE360-4T022G/030L Specifications

General

Brand	Canworld
Model	CDE360-4T022G/030L
Category	DC Drives
Language	English