CDE500 Vector Control AC Drive Preface
Preface
Thank you for purchasing CDE500 Vector Control AC Drive developed by Shenzhen Canworld
Electrical Technology Co.,Ltd.
The CDE500 series AC drive is a general-purpose high-performance vector control AC drive, which
is widely used for simple fan and pump driving, and automatic controlling in specific industry
equipment of Textile,Stone sawing machine,Air compressor,Spindle servo drive ,Crane,Veneer
peeling machine,line cutting machine,oil-fields and wire drawing machine. It can also provide
all-in-one solution for the application of ball crusher,injection molding machine and intelligent motor.
This manual describes the notes and guidance of selection, installation, parameter setting, field
debugging, fault diagnostics and daily maintenance. Read and understand the user manual before
use and forward the manual to the end user.
The drawings in the user manual are sometimes shown without covers or protective
guards.Remember to install the covers and protective guards according to the user manual,
then perform operations in accordance with the instructions.
The drawings in the manual are shown for description only and may not match the product
The instructions are subject to change without notice, due to product upgrade and the
efforts to increase the accuracy and convenience of the user manual.
Contact our agents or customer service center if you need to purchase this user manual.
Contact our customer service center if you have problems during the use.
Service hot line: +86 4000-888-699 Fax: +86 755-26617646
Data Code: EN31544A001
To Next Page
Need help?
General
