Canworld CDE360-4T7R5G/011L - User Manual

CDE360 Vector Control AC Drive Preface
Preface
Thank you for purchasing CDE360 Vector Control AC Drive developed by Shenzhen Canworld
Electrical Technology Co., Ltd.
The CDE360 series AC drive is a general-purpose high-performance vector control AC drive, which
is widely used for simple fan and pump driving, and automatic controlling in specific industry
equipment of Textile, Stone sawing machine, Air compressor, Spindle servo drive, Crane, Veneer
peeling machine, line cutting machine, oil-fields and wire drawing machine. It can also provide
all-in-one solution for the application of ball crusher, injection molding machine and intelligent motor.
This manual describes the notes and guidance of selection, installation, parameter setting, field
debugging, fault diagnostics and daily maintenance. Read and understand the user manual before
use and forward the manual to the end user.
Notes
 The drawings in the user manual are sometimes shown without covers or protective guards.
Remember to install the covers and protective guards according to the user manual, then
perform operations in accordance with the instructions.
 The drawings in the manual are shown for description only and may not match the product
that you purchased.
 The instructions are subject to change without notice, due to product upgrade and the
efforts to increase the accuracy and convenience of the user manual.
 Contact our agents or customer service center if you need to purchase this user manual.
 Contact our customer service center if you have problems during the use.
Service hot line: +86 4000-888-699 Fax: +86 755-26617646
Version: V1.1

Summary

Introduction to AC Drive Operation

Example 1: Keypad Control for Start;Stop and Frequency

Steps and parameters for controlling the AC drive using the keypad for start/stop and frequency setting.

Example 2: Digital Input and Analog Signal Control

Configuration and wiring for controlling the AC drive via digital inputs and analog signals.

Example 3: Communication Control via Modbus RTU

Steps for controlling the AC drive via RS485 communication using Modbus RTU protocol.

Chapter 1 Safety Information and Precautions

Safety Before Installation

Safety guidelines and precautions for handling and installing the AC drive before installation.

General Safety Precautions for AC Drive Usage

General precautions covering grounding, motor insulation, thermal protection, running conditions, and environmental factors.

Chapter 3 Mechanical and Electrical Installation

Mechanical Installation Requirements

Electrical Installation Overview

Overview of electrical installation, including connection diagrams of peripheral devices like breakers, reactors, and motors.

Peripheral Electrical Components Selection Guidance

AC Drive Terminals Wiring Diagram

Power Terminals of the Main Circuit

Details on power terminals of the main circuit, including safety precautions and diagrams for different models.

Control Terminals and Wiring Description

Chapter 4 Operation, Display, and Application

Keypad Interface Overview

Overview of the keypad interface, showing LED (Keypad A) and LED/LCD (Keypad B) types with their buttons and displays.

Keypad Indicators and Function Keys

Keypad Display and Menu Navigation

Parameters Upload;Download and Setting

Procedures for backing up and copying parameters between the AC drive and keypad, and setting user passwords.

Chapter 7 Fault Detection and Diagnostics

Faults and Solutions Overview

Guide to detecting and diagnosing faults and alarms, providing display codes, fault names, possible causes, and solutions for the AC drive.

Common Faults and Solutions Analysis

Common faults encountered during drive usage, with methods for simple analysis and solutions, including tips for contacting support.

Chapter 8 Communication Protocol

MODBUS Protocol Functions and Address Mapping

Chapter 9 Maintenance

Routine Repair and Maintenance Procedures

Guidelines for routine maintenance activities, including periodic inspections of parameters, cooling, motor, and environment.

Canworld CDE360-4T7R5G/011L Specifications