CAP 413 - Page 145

CAP 413 Radiotelephony Manual
Chapter 6 Page 19
Figure 2 Join and hold for non-precision approach
Figure 3 Procedure
RTF for a Non-precision Approach
Position 1: Pilot transmits callsign, aircraft type, position, flight level, flight
conditions, estimate for the beacon and requests type of approach
required.
Position 2: When overhead the beacon, pilot reports 'Callsign, entering the hold,
maintaining (altitude/flight level)'.
Position 3: Pilot reports 'Callsign, beacon outbound' (in Figure 2 when overhead
the beacon).
Position 4: Pilot reports 'Callsign, base turn complete'.
Position 5: Pilot reports 'Callsign, 4 DME' (or other position as required).
1
2
4
5
3
31 March 2011