using the FM radio
! Turn on the unit and select “FM” by repeatedly pressing the Source/Time Sync Button until “FM” appears on
the display.
" Repeatedly press the TUNE UP / SKIP / SEARCH or TUNE DOWN / SKIP / SEARCH button to manually
advance the frequency on the display up or down until the desired frequency appears. For AUTO TUNING, press and
hold the TUNE UP / SKIP / SEARCH
or TUNE DOWN / SKIP / SEARCH button until the frequency in the display
starts to scan and then release. The tuner will search and then stop on the next strong station it nds. Repeat this
step until the desired frequency appears on the display.
notes: Unravel and extend the FM wire antenna for best reception.
After listening to a station for ve seconds, the radio frequency will disappear and the time will appear on the display.
radio presets
! To SET RADIO PRESET, follow the steps in the previous section to tune a station. Press and hold PLAY / PAUSE /
PRESET button to create a preset for the current station. “P” will appear and “##” (the preset number) will blink on
the display.
" Press the TUNE UP / SKIP / SEARCH or TUNE DOWN / SKIP / SEARCH button to select a preset number
(01-10). Press the PLAY / PAUSE / PRESET button again to conrm the setting and the station will be saved into
memory. Repeat these steps for up to 10 presets, as desired.
# To RETRIEVE radio PRESET, follow Steps 1-2 to set your radio presets. Press and hold the PLAY / PAUSE / PRESET
button and “PRESET” will blink on the display.
$ Repeatedly press the PLAY / PAUSE / PRESET button until the desired preset number appears in the display and the
unit tunes to the station.
To Next Page
Loading...
