Why is my Caple Ventilation Hood lights on but the fan not working?
If the lights are on but the fan isn't working, it could be due to a jammed fan blade or a damaged motor. If the fan blade is jammed, switch off the unit and contact Caple Service. This should be repaired only by qualified service personnel.
What to do if my Caple Ventilation Hood is vibrating seriously?
Serious vibration in your Caple Ventilation Hood can be caused by a damaged fan blade, a fan motor that isn't tightly fixed, or incorrect mounting on the bracket. If the fan blade is damaged or the motor isn’t fixed tightly, switch off the unit and contact Caple Service to be repaired by qualified service personnel only. If the unit is not hung correctly on the bracket, take down the unit and check whether the bracket is in the correct location.
Why are the lights and fan not working on my Caple Ventilation Hood?
If the lights and fan on your Caple Ventilation Hood aren't working, it could be due to a blown fuse or a loose power cord. Try replacing the fuse. Also, ensure the power cord is securely plugged into the power supply.
How to improve the extraction performance of my Caple Ventilation Hood?
Poor extraction performance in your Caple Ventilation Hood may indicate that the filter requires cleaning. Clean the grease filter as directed in the ‘Care and maintenance’ section. Also, if your hood is in recirculation mode, replace the charcoal filter.
General| Model | BU525BK |
|---|---|
| Type | Wall Mounted |
| Finish | Black |
| Noise Level | 65 dB |
| Lighting | LED |
| Controls | Push Button |
| Grease Filter Type | Aluminium |
| Number of Speeds | 3 |
| Number of Motors | 1 |
| Lighting Power | 2 x 1.5W |
| Material | Stainless Steel |
To Next Page
