What to do if the Caple Ventilation Hood lights and fan do not work?
If the lights and fan on your Caple Ventilation Hood aren't working, it could be due to a blown fuse. In this case, replace the fuse. Another possible cause is a loose power cord, so ensure that the power cord is properly plugged into the power supply.
Why is my Caple CCH601SS Ventilation Hood extraction performance not good?
Poor extraction performance in your Caple Ventilation Hood is often due to a filter that requires cleaning. Clean the grease filter as directed in the ‘Care and maintenance’ section. If your hood is in recirculation mode, consider replacing the charcoal filter.
Why is my Caple CCH601SS vibrating so much?
Serious vibration in your Caple Ventilation Hood could be due to several reasons: * A damaged fan blade. * The fan motor not being fixed tightly. * The unit not being correctly hung on the bracket. In the case of fan blade or motor issues, switch off the unit and contact Caple Service. If the unit isn't hung correctly, take down the unit and check the bracket's location.
How to fix a Caple Ventilation Hood when the light is on but the fan is not working?
If the lights are on but the fan isn't working on your Caple Ventilation Hood, it could be because the fan blade is jammed or the motor is damaged. Switch off the unit and contact Caple Service. This should be repaired by qualified service personnel only.
General| Brand | Caple |
|---|---|
| Model | CCH601SS |
| Category | Ventilation Hood |
| Language | English |
To Next Page
