Caple C2402 User Manual

Instruction manual C2402/C2402SS/C2402GM
12
Please keep this instruction manual for future reference
See below for full dimensional drawings of your oven to help with installation.
For a built-in oven to work well the cabinet must be of the right type.
The panels of the adjoining furniture should be heat resistant. Particularly when the adjoining
furniture is made of veneered wood, the adhesives should be able to withstand a temperature
of 120ºC. Plastic materials or adhesive which cannot withstand this temperature may become
deformed or unstuck.
To comply with safety regulations, once the appliance has been fitted it should not be possible to
make contact with the electrical parts.
All parts which offer protection should be fixed in such a way that they cannot be removed
without the use of a tool.
OVEN DIMENSIONS
Instruction manual
Please keep this instruction manual for future reference
13
See below for full dimensional drawings of your steam oven to help with
installation.
For a built-in steam oven to work well the cabinet must be of the right type.
The panels of the adjoining furniture should be heat resistant. Particularly when
the adjoining furniture is made of veneered wood, the adhesives should be able
to withstand a temperature of 120ºC. Plastic materials or adhesive which cannot
withstand this temperature may become deformed or unstuck.
To comply with safety regulations, once the appliance has been fitted it should
not be possible to make contact with the electrical parts.
All parts which offer protection should be fixed in such a way that they cannot be
removed without the use of a tool.
PRODUCT DIMENSIONS
Instruction manual
Please keep this instruction manual for future reference
13
See below for full dimensional drawings of your steam oven to help with
installation.
For a built-in steam oven to work well the cabinet must be of the right type.
The panels of the adjoining furniture should be heat resistant. Particularly when
the adjoining furniture is made of veneered wood, the adhesives should be able
to withstand a temperature of 120ºC. Plastic materials or adhesive which cannot
withstand this temperature may become deformed or unstuck.
To comply with safety regulations, once the appliance has been fitted it should
not be possible to make contact with the electrical parts.
All parts which offer protection should be fixed in such a way that they cannot be
removed without the use of a tool.
PRODUCT DIMENSIONS
540mm
565mm
5mm
555mm
20mm
578mm
540mm
20mm
467mm
593mm
116mm
595mm
5mm
20mm

Caple C2402 Specifications

General

Brand	Caple
Model	C2402
Category	Oven
Language	English