10 Instruction manual C4061G/C4071G/C4091G Please keep this instruction manual for future reference
HOW TO USE YOUR APPLIANCE
The position of the corresponding gas burner is indicated on each control knob.
GAS BURNERS
The burners differ in size and power. Choose the most appropriate one for the diameter of the
cookware being used.
The burner can be regulated with the corresponding control knob by using one of the following
settings:
This hob is equipped with an ignition switch incorporated into the control knob. To light a burner,
simply press the corresponding knob all the way in and, then, turn it in the counter-clockwise
direction to the High setting, keeping it pressed in until the burner lights.
As a safety device is fitted, the knob must be pressed in for about 10 seconds, until the device that
keeps the flame lit warms up.
CAUTION
To turn off a burner, turn the knob in the clockwise direction until it stops (it should be on the
off setting).
OF F
HIGH
LOW
IGNITE
To Next Page
Loading...
