Caple C786G - Care and Maintenance

11Instruction manual C786G, C787G & C789GPlease keep this instruction manual for future reference
CARE AND MAINTENANCE
Before cleaning or performing maintenance on your appliance, disconnect it from the electrical
power supply.
› To extend the life of the hob, it is absolutely indispensable that it be cleaned carefully and
thoroughly on a frequent basis, keeping in mind the following:
› The enameled parts must be washed with warm water without using abrasive powders or
corrosive substances which could ruin them;
› The removable parts of the burners should be washed frequently with warm water and soap,
making sure to remove caked-on substances;
› The end of the electronic ignition device must be cleaned carefully and frequently, making sure
that the gas holes are not clogged;
GREASING THE GAS VALVES:
Over time, the gas valves may stick or become difficult to turn. If this is the case, they must be
cleaned on the inside and the re-greased.
NOTE:
This procedure must be performed by a Caple approved engineer or similar qualified persons.