13
• Power levels:
For optimal using and control of your cooking process, 17 power levels are implemented.
When a pan is selected the display shows only full power levels on the slider.
As soon as a power level is selected on the slider, a little dot will be displayed between the full power levels to
indicate half power levels.
Pan detection
The pan detection ensures perfect safety. The induction doesn’t work:
• If there is no pan on the heating zone.
• If this pan is not suitable to the induction.
In this case it is impossible to increase the power and the display shows:
An information message can be displayed by pressing the mark.
It informs the user that the pan isn’t suitable for induction and another pan must be used.
• If the pan is removed from the heating zone the operation is stopped. The display shows the pan in grey.
When the pan is put back on the heating zone, the display is showed in colour again and the cooking
continues with the power level set before.
Pan move function
This function allows you to move your pan to any place in the cooking area zone, while always keeping the
associated settings.
It is important to always move one pan at a time.
If several movements are made simultaneously, an inconsistency will be detected by the hob:
• One of the pans will no longer be displayed.
• One of the pans will not be displayed on the right place.
• An error can appear on the screen.
To avoid scratches and damage on the glass top:
We recommend to you lift pans and not slide them over the hob!
Residual heat indication
After the switching off of a heating zone or the complete stop of the hob, the heating zones are still hot and
indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched safely.
As long as the residual heat indicators are on, don’t touch the heating zones and don’t put any heat sensitive object
on them. There are risks of burn and fire.
To Next Page
Loading...
