Caple C990i - Page 14

14
Booster function
The Booster function [ B ] add a booster power to the selected heating zone.
If this function is activated the heating zones work for 10 minutes with an ultra-high Booster.
Booster is useful for example to heat up rapidly big quantities of water for rice, pasta or noodles etc.
• Start-up / Stop the booster function:
Action Control panel Display
Pan selection Select the desired zone [ 0 ]
Start up the Booster Slide on the “SLIDER” to [ B ] [ B ]
Stop the Booster Slide on the “SLIDER” [ 9 ] to [ 0 ]
• Power management:
The Power Management prevents the mains connection from overloading.
The Power Management is prioritizing, e.g. the pan with the last increased power level, will get the desired power
level. Another pan that is put on the same induction coil will be reduced in its power if the total power request of the
two pans exceeds 3.7 kW. In that case you hear an acoustic feedback and the power level of the pan will be reduced
to the maximum possible power:
Heating zone selected The other heating zone: (example: level 9)
[ B ] is displayed [ 9 ] goes to [ 6 ] or [ 8 ] depending on the type of pan
Timer
The timer is able to be used simultaneous with all heating zones and this with different time settings
(from 0 to 9 hours and 59 minutes) for each heating zone.
• Setting and modification of the cooking time:
Example for 1 hour and 20 minutes at power 2:
Action Control panel Display
Pan selection Select the desired pan [ 0 ]
Select the power level Slide on the “SLIDER” to [ 2 ] [ 2 ]
Select “Timer” Press [ ] next to the pan [ 00:00 ]
Set the minutes Scroll to [ 20 ] [ 00:20 ]
Set the hours Scroll to [ 01 ] [ 01:20 ]
Validate the settings Press [ ] to validate the settings [ 01:20 ] appears next to the pan on the
screen and the Timer start
The time is confirmed, and the cooking starts.