Instruction manual C995i 27
Please keep this instruction manual for future reference
› Check with an electrician whether the domestic wiring system is suitable without
alterations. Any alterations must only be made by a qualified electrician.
› If the cable is damaged or needs replacing the operation must be carried out by a Caple service
engineer.
› If the appliance is being connected directly to the mains an omnipolar circuitbreaker must be
installed with a minimum opening of 3mm between contacts.
› The installer must ensure that the correct electrical connection has been made and that it is
compliant with safety regulations.
› The cable must not be bent or compressed.
› The cable must be checked regularly and replaced by authorised technicians only.
The bottom surface and the power cord of the hob are not accessible after installation.
To Next Page
Loading...
