Instruction manual CM108 25
Please keep this instruction manual for future reference
TROUBLESHOOTING
TECHNICAL DATA
The microwave does not operate › Check it is switched on at the mains
› There has been a power cut
› The time is not set
The control panel is not working Check to see if the child lock is on. If so, hold the lock key to
turn it off.
The interior lamp does not illuminate Contact Caple service.
E2 error code appears on the screen Interior sensor error. Contact Caple service.
BUILT-IN MICROWAVE
Model CM108
Rated voltage 220 - 240V ~
Rated frequency 50Hz
Rated Microwave Input Power 1500W
Microwave rated output power 1000W
Volume 40L
To Next Page
Loading...
